Chain Driven Back Baton Romans

• Romans are manufactured with even panels, (approx. 180-220 mm) with top panel approximately 100 mm larger than the other panels.
• Roman panel size is determined by the drop of the blind therefore if blinds are side by side with different drops the panels will not line up.
• When romans are side by side with same drop the panels will line up. (+/-5 mm)
• If maximum clearance of window is required consider going above architrave by 200-250 mm if possible.
• To decrease light from the sides of blind consider making the blind wider by 20-50 mm also longer by 20-50 mm.
• Due to the inherent nature of the roman blinds i.e. fabric type, blind width and blind drop they may drop by as much as 20 mm as they settle.
• All blinds manufactured with 43 mm headboard with fabric attached with velco to the top to allow for adjustments if necessary.
• Recess romans not recommended.
• Roman Blinds are manufactured with an oval bottom bar finish or pocket with lathe please specify.